Saw blades for cutting of tool steel and stainless steel up to the hardness of 50 HRC. The tooth tips are made of HSS-M51 steel with cobalt and tungsten content.
Maxtech 531 / variable toothing
Characteristics:
tooth tips made of HSS M51 1.3207 ● especially strong shape of the tooth with a positive tooth face angle ● resistant to heat and deterioration tooth tips made of HSS M51 material increase the durability of the saw blade when cutting any possible hard and problematic materials.
Use:
- steel up to tensile strength of approx. 1700 N/mm2
- austenitic stainless steel
- nickel-based alloys
- titanium and special bronzes
- full material of medium dimensions
- thick-walled tubes.
| PNumber of teeth per inch | |||||
|---|---|---|---|---|---|
| [mm] | 1,4/2 | 2/3 | 3/4 | 4/6 | 5/8 |
| 27 x 0,9 | V-POS | V-POS | V-POS | V-POS | |
| 34 x 1,1 | V-POS | V-POS | V-POS | ||
| 41 x 1,3 | V-POS | V-POS | |||
| 54 x 1,6 | V-POS | V-POS | |||
| 67 x 1,6 | V-POS | ||||
V-POS = variable tooth with a positive angle
Maxtech 537 / variable toothing
Characteristics:
accurate, borazon ground tooth tips made of HSS M51 1.3207 ● tooth with a specific positive tooth face angle combined with borazon sharpened geometry and variable group setting diverts chips perfectly ● faceted teeth ensure excellent saw blade guidance at lower vibrations ● hardness of the tooth tips is approx. 69 HRc which increases the durability of the saw blade and the cutting performance.
Use:
- steel up to tensile strength of approx. 1700 N/mm2
- austenitic stainless steel
- nickel-based alloys
- full material of medium dimensions.
| Number of teeth per inch | |||||
|---|---|---|---|---|---|
| [mm] | 0,75/1,25 | 1/1,5 | 1,4/2 | 2/3 | 3/4 |
| 34 x 1,1 | V-POS | V-POS | |||
| 41 x 1,3 | V-POS | V-POS | V-POS | ||
| 54 x 1,6 | V-POS | V-POS | V-POS | V-POS | |
| 67 x 1,6 | V-POS | V-POS | V-POS | V-POS | |
| 80 x 1,6 | V-POS | V-POS | |||
V-POS = variable tooth with a positive angle
Maxtech 544 / variable toothing
Characteristics:
tooth tips made of HSS M51 1.3207 ● special tooth form with a specific positive tooth face angle and standard setting ● perfect shape and surface quality of the teeth is achieved through pressure grinding during manufacturing
Use:
- steel up to tensile strength of approx. 1700 N/mm2
- austenitic stainless steel
- nickel-based alloys
- ttitanium and special bronzes
- full material of the largest dimensions.
| Počet zubů na palec | |||
|---|---|---|---|
| [mm] | 0,75/1,25 | 1/1,5 | 1,4/2 |
| 41 x 1,3 | V-POS | ||
| 54 x 1,6 | V-POS | V-POS | |
| 67 x 1,6 | V-POS | V-POS | |
| 80 x 1,6 | V-POS | V-POS | |
V-POS = variable tooth with a positive angle
