Horizontal Boring Mill – T-Type
Features
• contouring horizontal boring machine
• cross-shaped beds
• 3 linear axes, rotary table with additional supports
• non-sliding workspindle
• machine designed for universal application in engineering production
• allows carousel usage of rotary table
• suitable for roughing as well as precision contouring
• optionally can be fitted with tool magazine with manipulator (ATC), tool cooling kit (CHZ), cooling through
• spindle axis (CHOV), oil-mist cooling, swarf conveyor or motorspindle
Optionally
ATC
• ATC facility is a separate unit
• magazine with servodrive for tool beds positioning
• changer driven electrically / pneumatically
CHZ
• tool cooling set with four jets on headstock front side
• separate cooling unit – tank with pump, level gauge, pressure test
• tank volume approx. 150 l
• maximal pressure 4 bar / 32 l/min
• setup for tool cooling always included – distribution pipes, jets
CHOV
• once production has started is not possible to add into configuration
• separate cooling unit with filter and magnetic swarf separator required
• maximal pressure 40 bar – emulsion - tank volume 1000 l
• maximal pressure 80 bar – oil - tank volume 100 l
• both emulsion and oil may not be used for one particular machine
• other necessary alterations to machine and CE features depend on the required cooling pressure
• for pressure higher than 10 bar the cover of the workpiece or of the machine must be used
Oil-Mist Cooling
• can be added to machine at any time
• easy to assemble
• easy to use
Motorspindle
• spindle parameters as specified by client
Swarf Conveyor
• fixed to transversal bed between table and column
