Horizontal Boring Mill – T-Type
Features
• contouring horizontal boring machine
• cross-shaped beds
• 4 linear axes, rotary table
• sliding workspindle
• machine designed for universal application in engineering production
• suitable for roughing as well as for finishing
• optionally can be fitted with tool cooling kit (CHZ), oil-mist cooling or swarf conveyor
• also can be fitted with non-sliding workspindle up to 5000 rpm or by motorspindle as specified by client
Optionally
CHZ
• tool cooling set with jets on headstock front side
• separate cooling unit – tank with pump, level gauge, pressure test
• tank volume approx. 150 l
• maximal pressure 4 bar / 32 l/min
• setup for tool cooling always included – distribution pipes, jets
Oil-Mist Cooling
• can be added to machine at any time
• easy to assemble
• easy to use
Non-Sliding Spindle
• non-sliding spindle up to 5000 rpm
• distance of spindle face from headstock face c. 350 mm
• spinle drive with four hydraulically switched mechanical lines remains principally the same
Motorspindle
• spindle parameters as specified by client
Swarf Conveyor
• placed under longitudinal bed in hole in machine foundation (between table and column)
